Views: 791 Author: Site Editor Publish Time: 2019-05-18 Origin: Site
Introduce the functions of each department and group:
Pre-milling: Double milling cutter is used to re-modify the ripple marks, burrs or non-vertical phenomena caused by cutting board saw and cutting material saw, so as to achieve better edge sealing effect. Make the edge of the sealing strip and the plate more closely, the integrity and aesthetics are better.
Glue-coated edge-sealing: Through special structure, the edge-sealing plate and edge-sealing material are coated evenly on both sides to ensure a stronger bonding force.
Head alignment: Through precise linear rail movement, the cutting surface is smooth and smooth by adopting automatic tracking by mould and high-frequency and high-speed motor cutting structure.
Refinement: All of them adopt the structure of Auto-tracking by mould and high-frequency and high-speed motor to ensure the smoothness and smoothness of the upper and lower parts of the trimmed sheet. It is used to trim the superfluous edge-sealing materials on and off the edge-sealing strip of the processing plate. The finishing cutter is R-shaped. It is mainly used for PVC and acrylic edge seals of panel furniture. The edge seals over 0.8mm thick are preferred.
Scraping: It is used to eliminate the ripple marks caused by the cutting process of non-linear movement of trimming, so as to make the upper and lower parts of the plate smoother and neater.
Polishing: Use cotton polishing wheel to clean up the processed plate, and make the end of the sealing surface smoother by polishing.
Slotting: It is used for direct grooving of side panels and bottom panels of wardrobes, which makes the process of cutting board sawing more convenient and fast. It can also be used for grooving of aluminium-clad edges of door panels.