Processing Of Sealing Line Of Semi-automatic Edge Sealer

The glue line between the plate and the edge band after edge sealing will have a negative impact on the appearance of panel furniture. If the amount of glue is too large, the glue thread will be obvious, on the contrary, the edge sealing strength will be reduced. For discontinuous or non-uniform glue line phenomenon, there are many reasons.

The following factors should be considered comprehensively: the blanking accuracy of sheet metal, the edge of sheet metal must keep 90 degree angle with its plane; whether the pressure of press roll of edge sealing machine distributes evenly and appropriately, the direction of pressure should be 90 degree angle with the edge of sheet metal; whether the glue roll is in good condition and whether the hot melt glue is uniform on it. Whether the amount of glue is suitable or not; the plate with the edge sealed should be kept in a cleaner place with less dust. In the finishing process, dirty things should be avoided from contacting the glue thread. Shanghai semi-automatic edge-sealing machine earns the advantages of trust, automatic edge-sealing machine and Shanghai automatic edge-sealing machine quality station with enthusiasm.